USEUROPEAFRICAASIA 中文双语Français
China
Home / China / Innovation

C919 boasts global sourcing model

By Zhu Wenqian | China Daily | Updated: 2017-06-13 07:10

C919 boasts global sourcing model

A C919 aircraft undergoes checks in Shanghai after a test flight. [Photo/China Daily]

Editor's note: In the run-up to the 19th National Congress of the Communist Party of China, China Daily will cover a series of key projects and advanced equipment of national importance, showcasing the country's huge improvements and relentless efforts in manufacturing upgrading and innovation.

The C919 aircraft, China's first homegrown large passenger jet, boasts a global sourcing model that is similar to that of Boeing Co and Airbus Group SE. The model is believed to increase production efficiency and save costs, but aircraft manufacturers retain control of key technologies.

The C919 plane also has several significant technical breakthroughs. Intense research and development was conducted before production, and it uses a large amount of composite materials.

For instance, 85 percent of its tail section is made from composite materials, according to Commercial Aircraft Corp of China Ltd, manufacturer of the C919. In China, the technology to apply composite materials is still in its infancy, and the application requires mould manufacturing, temperature control and other techniques.

Harbin Hafei Industry Co Ltd, an aviation manufacturer in Harbin, Heilongjiang province, is mainly responsible for the manufacturing of some parts that mainly use composite materials, including the hatch door for the front landing gear and the main landing gear, as well as the vertical tail of the C919.

Li Wei, deputy chief engineer of the C919 project at Hafei, said: "We cooperated with Boeing, Airbus and Embraer before. The design capabilities, quality system, and the supplier management capability of COMAC are in line with international standards, when compared with established aircraft manufacturers."

With more than 100,000 components required for the plane, more than 240 local Chinese companies have served as suppliers and manufacturers for the C919. More than 460,000 people have been involved in its research and development, and 37 higher education institutions joined the C919 project, COMAC said.

Once the C919 plane starts mass production and delivery, it is expected to drive the rapid growth of the upstream and downstream industry chains and other high-end manufacturing sectors, such as metal materials, mechanical manufacturing, electronic information and chemistry.

Wu Xingshi, a member of the State Council's large passenger aircraft program's expert advisory committee, said the C919 model has applied for airworthiness certificates with the industry's regulator, the Civil Aviation Administration of China, as well as the Europe Aviation Safety Agency, and China aims to accelerate the approval process for the C919.

"For the ARJ21, the nation's first domestic commercial regional aircraft, it took about six to seven years of test flights before it received the airworthiness certificate, which was the longest period for commercial aircraft in history," he said.

"The ARJ21 serves as a pioneer in China, and the test flight process of the C919 should be faster and more smoothly, until it proves that it can meet the operational requirements for commercial use."

Lin Zhijie, an aviation industry analyst and columnist at Carnoc.com, one of China's largest civil aviation web portals, said China serves as the initiator and host of the C919 project.

He said China is responsible for the original design, assembly and supplier management, and those responsibilities are seen as the key parts of large commercial aircraft manufacturing.

"The capability of producing large commercial aircraft is a critical index to assess the industrial manufacturing and technological strengths of a country," Lin said.

"We don't need to label the C919 as 100 percent made-in-China. Our aim is to integrate the most advantageous resources and latest technologies, and produce aircraft that will be competitive in the global market."

Despite the promising prospects, Lin said the C919's entry to the market won't occur very soon. It is expected to go into operation between 2020 and 2022, and it ultimately aims to break the global market duopoly of Boeing and Airbus.

Boeing Co earlier lifted its forecast for China. It said in the next two decades, the nation is likely to become the first country with an aviation market exceeding $1 trillion. During that period, Chinese airlines are estimated to purchase 6,810 airplanes valued at $1.025 trillion.

 

Editor's picks
Copyright 1995 - . All rights reserved. The content (including but not limited to text, photo, multimedia information, etc) published in this site belongs to China Daily Information Co (CDIC). Without written authorization from CDIC, such content shall not be republished or used in any form. Note: Browsers with 1024*768 or higher resolution are suggested for this site.
License for publishing multimedia online 0108263

Registration Number: 130349
FOLLOW US