Global EditionASIA 中文双语Français
World
Home / World / Kaleidoscope

NASA's InSight lander 'hears' Martian winds

Xinhua | Updated: 2018-12-08 08:49
Share
Share - WeChat
An artistic illustration of NASA's InSight lander. [Photo/IC]

LOS ANGELES — NASA's InSight lander, which touched down on Mars last week, has provided the first ever "sounds" of Martian winds on the Red Planet, said NASA on Friday.

InSight sensors captured a haunting low rumble caused by vibrations from the wind, estimated to be blowing between 10 to 15 mph (5 to 7 meters a second) on Dec. 1, from northwest to southeast, according to NASA.

The winds were consistent with the direction of dust devil streaks in the landing area, which were observed from orbit, said NASA.

"Capturing this audio was an unplanned treat," said Bruce Banerdt, InSight principal investigator at NASA's Jet Propulsion Laboratory (JPL) in Pasadena, California. "But one of the things our mission is dedicated to is measuring motion on Mars, and naturally that includes motion caused by sound waves."

According to NASA, two very sensitive sensors on the spacecraft detected these wind vibrations: an air pressure sensor inside the lander and a seismometer sitting on the lander's deck, awaiting deployment by InSight's robotic arm.

The two instruments recorded the wind noise in different ways. The air pressure sensor, which will collect meteorological data, recorded these air vibrations directly. The seismometer recorded lander vibrations caused by the wind moving over the spacecraft's solar panels, which are each 7 feet (2.2 meters) in diameter and stick out from the sides of the lander like a giant pair of ears.

This is the only phase of the mission during which the seismometer, called the Seismic Experiment for Interior Structure (SEIS), will be capable of detecting vibrations generated directly by the lander, said NASA.

In a few weeks, it will be placed on the Martian surface by InSight's robotic arm, then covered by a domed shield to protect it from wind and temperature changes. It will detect the lander's movement through the Martian surface, said NASA.

SEIS is recording vibrational data that scientists later will be able to use to cancel out noise from the lander when SEIS is on the surface, allowing them to detect better actual marsquakes.

With a reach of nearly 6 feet (2 meters), the arm of inSight will be used to pick up science instruments from the lander's deck, gently setting them on the Martian surface at Elysium Planitia, the lava plain where InSight touched down.

The arm will use its Instrument Deployment Camera, located on its elbow, to take photos of the terrain in front of the lander. These images will help mission team members determine where to set SEIS and heat flow probe, the only instruments ever to be robotically placed on the surface of another planet, said NASA.

Another camera, called the Instrument Context Camera, located under the lander's deck, will also offer views of the workspace.

InSight landed safely on Mars on No

26, kicking off a two-year mission to explore the deep interior of the Red Planet.

Most Viewed in 24 Hours
Top
BACK TO THE TOP
English
Copyright 1995 - . All rights reserved. The content (including but not limited to text, photo, multimedia information, etc) published in this site belongs to China Daily Information Co (CDIC). Without written authorization from CDIC, such content shall not be republished or used in any form. Note: Browsers with 1024*768 or higher resolution are suggested for this site.
License for publishing multimedia online 0108263

Registration Number: 130349
FOLLOW US